ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Virtual Private Networking Using IPsec Connections 5-51
v1.0, April 2010
2. In the upper left of the Policy Editor window, click the New Connection icon (the first icon on
the left) to open a new connection. Give the new connection a name; in this example, we are
using ModeConfigTest.
3. Enter the settings as explained in Table 5-17.
Figure 5-28
Table 5-17. Security Policy Editor: Remote Party, Mode Config Settings
Setting Description (or Subfield and Description)
Connection Security Select the Secure radio button. If you want to connect manually only, select the
Only Connect Manually check box.
ID Type From the drop-down list, select IP Subnet.
Subnet Enter the LAN IP subnet address that you specified on the Add Mode Config
Record screen in the Local IP Address field. If you left the Local IP Address
field blank, enter the VPN firewall’s default IP subnet address. In this example,
we are using 192.168.1.0.
Mask Enter the LAN IP subnet mask that you specified on the Add Mode Config
Record screen in the Local Subnet Mask field. If you left the Local Subnet Mask
field blank, enter the VPN firewall’s default IP subnet mask. In this example, we
are using 255.255.255.0.
To Next Page
Loading...
