ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
5-54 Virtual Private Networking Using IPsec Connections
v1.0, April 2010
7. Click the disk icon to save the configuration, or select File > Save from the Security Policy
Editor menu.
8. In the left frame, click Security Policy. The screen adjusts.
ID Type From the drop-down list, select Domain Name. Then, below, enter the remote
FQDN that you specified in the VPN firewall’s Mode Config IKE policy. In this
example, we are using srx_remote2.com.
Secure Interface
Configuration
Select Preferred from the Virtual Adapter drop-down list.
Internet Interface Leave the default setting, which is the Any selection from the Name drop-
down list.
Figure 5-30
Table 5-18. Security Policy Editor: My Identity, Mode Config Settings (continued)
Setting Description (or Subfield and Description)
To Next Page
Loading...
