ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
6-12 Virtual Private Networking Using SSL Connections
v1.0, April 2010
3. Select the check box and complete the fields as explained Table 6-3.
Figure 6-4
Table 6-3.
Client IP Address Range Settings
Item Description (or Subfield and Description)
Client IP Address Range
Enable Full Tunnel Support Select this check box to enable full tunnel support. If you leave this check
box cleared (which is the default setting), split tunnel support is enabled,
and you must add client routes (see “Adding Routes for VPN Tunnel
Clients” on page 6-13).
Note: When full tunnel support is enabled, client routes are not operable.
DNS Suffix A DNS suffix to be appended to incomplete DNS search strings. This is
optional.
Primary DNS Server The IP address of the primary DNS server that is assigned to the VPN
tunnel clients. This is optional.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
To Next Page
Loading...
