NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
7-10 Managing Users, Authentication, and Certificates
v1.0, April 2010
• Group. The group to which the user is assigned.
• Type. The type of access credentials that are assigned to the user.
• Authentication Domain. The authentication domain to which the user is assigned.
• Action. The Edit table button that provides access to the Edit User screen; the Policies
table button that provides access to the policy screens.
2. Click the Add table button. The Add User screen displays.
3. Enter the settings as explained in Table 7-4.
Figure 7-6
Table 7-4. Add User Settings
Setting Description (or Subfield and Description)
User Name A descriptive (alphanumeric) name of the user for identification and management
purposes.
User Type From the drop-down list, select one of the predefined user types that determines
the access credentials:
• Administrator. User who has full access and the capacity to change the VPN
firewall configuration (that is, read/write access).
• SSL VPN User. User who can only log in to the SSL VPN portal.
• IPSEC VPN User. User who can only make an IPsec VPN connection via a
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled
(see “Configuring Extended Authentication (XAUTH)” on page 5-37).
• Guest User. User who can only view the VPN firewall configuration (that is,
read-only access).