ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
7-16 Managing Users, Authentication, and Certificates
v1.0, April 2010
2. In the Action column of the List of Users table, click the Edit table button for the user for
which you want to modify the settings. The Edit User screen displays.
3. Enter the settings as explained in Table 7-6.
Figure 7-10
Table 7-6. Edit User Settings
Setting Description (or Subfield and Description)
User Type From the drop-down list, select one of the pre-defined user types that
determines the access credentials:
• Administrator. User who has full access and the capacity to change the
VPN firewall configuration (that is, read/write access).
• SSL VPN User. User who can only log in to the SSL VPN portal.
• IPSEC VPN User. User who can only make an IPsec VPN connection via
a NETGEAR ProSafe VPN Client, and only when the XAUTH feature is
enabled (see “Configuring Extended Authentication (XAUTH)” on
page 5-37).
• Guest User. User who can only view the VPN firewall configuration (that
is, read-only access).
Check to Edit Password Select this check box to make the password fields accessible to modify the
password.
Enter Your Password Enter the old password.
New Password Enter the new password.
Confirm New Password Reenter the new password for confirmation.
To Next Page
Loading...
