ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
2-8 Connecting the VPN Firewall to the Internet
v1.0, April 2010
The WAN Settings table displays the following fields:
• WAN. The WAN interface (WAN1, WAN2, WAN3, and WAN4).
• Status. The status of the WAN interface (UP or DOWN).
• WAN IP. The IP address of the WAN interface.
• Failure Detection Method. The failure detection method that is active for the WAN
interface. The following methods can be displayed:
–None
– DNS Lookup (WAN DNS Server)
– DNS Lookup (the configured IP address is displayed)
– PING (the configured IP address is displayed)
You can set the failure detection method for each WAN interface on its corresponding
WAN Advanced Options screen (see “Configuring the Auto-Rollover Mode and Failure
Detection Method” on page 2-18).
• Action. The Edit button provides access to the WAN ISP Settings screen (see step 2) for
the corresponding WAN interface; the Status button provides access to the Connection
Status screen (see step 4) for the corresponding WAN interface.
2. Click the Edit button in the Action column of the WAN interface for which you want to
automatically configure the connection to the Internet. The WAN ISP Settings screen displays.
(Figure 2-7 on page 2-9 shows the WAN1 ISP Settings screen as an example.)
To Next Page
Loading...
