ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
2-10 Connecting the VPN Firewall to the Internet
v1.0, April 2010
The auto detect process returns one of the following results:
• If the auto-detect process is successful, a status bar at the top of the screen displays the
results (for example, “DHCP service detected”).
• If the auto detect process senses a connection method that requires input from you, it
prompts you for the information. All methods with their required settings are explained in
Table 2-1.
• If the auto detect process does not find a connection, you are prompted either to check the
physical connection between your VPN firewall and the cable or DSL line or to check
your VPN firewall’s MAC address. For more information, see “Configuring the WAN
Mode” on page 2-16 and “Troubleshooting the ISP Connection” on page 10-5.
4. To verify the connection:
a. Return to the WAN screen by selecting Network Configuration > WAN Settings from
the menu.
b. Click the Status button in the Action column of the WAN interface that you just
configured to display the Connection Status popup window.
Table 2-1. Internet Connection Methods
Connection Method Manual Data Input Required
DHCP (Dynamic IP) No data is required.
PPPoE Login, Password, Account Name, Domain Name
PPTP Login, Password, Account Name, My IP Address, and Server IP Address;
Fixed (Static) IP IP Address, Subnet Mask, and Gateway IP Address; and related data
supplied by your ISP.
Figure 2-8
To Next Page
Loading...
