EasyManua.ls Logo

NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall - Page 77

NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
LAN Configuration 3-17
v1.0, April 2010
Adding PCs or Devices to the Network Database
To add PCs or devices manually to the network database:
1. In the Add Known PCs and Devices section of the LAN Groups screen (see Figure 3-6 on
page 3-16), enter the settings as explained in Table 3-2.
2. Click the Add table button to add the PC or device to the Known PCs and Devices table.
3. As an optional step: To enable DHCP address reservation for the entry that you just added to
the Known PCs and Devices table, select the check box for the table entry and click Save
Binding to bind the IP address to the MAC address for DHCP assignment.
Table 3-2. Add Known PCs and Devices Settings
Setting Description (or Subfield and Description)
Name Enter the name of the PC or device.
IP Address Type From the drop-down list, select how the PC or device receives it IP address:
Fixed (set on PC). The IP address is statically assigned on the PC or device.
Reserved (DHCP Client). Directs the VPN firewall’s DHCP server to always
assign the specified IP address to this client during the DHCP negotiation
(see “Setting Up Address Reservation” on page 3-19).
Note: When assigning a reserved IP address to a client, the IP address
selected must be outside the range of addresses allocated to the DHCP
server pool.
IP Address Enter the IP address that this PC or device is assigned in the IP Address field. If
the IP address type is Reserved (DHCP Client), the VPN firewall reserves the
IP address for the associated MAC address.
MAC Address Enter the MAC address of the PC or device’s network interface. The MAC
address format is six colon-separated pairs of hexadecimal characters (0–9 and
A–F), such as 01:23:45:67:89:AB.
Group From the drop-down list, select the group to which the PC or device is assigned.
(Group 1 is the default group.)
Profile Name From the drop-down list, select the VLAN profile to which the PC or device is
assigned. (defaultVlan is the default VLAN group.)

Table of Contents

Other manuals for NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall

Related product manuals