ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
LAN Configuration 3-23
v1.0, April 2010
Enable DHCP Server
(continued)
Primary DNS
Server
This is optional. If an IP address is specified, the VPN
firewall provides this address as the primary DNS server IP
address. If no address is specified, the VPN firewall
provides its own LAN IP address as the primary DNS server
IP address.
Secondary DNS
Server
This is optional. If an IP address is specified, the VPN
firewall provides this address as the secondary DNS server
IP address.
WINS Server This is optional. Enter a WINS server IP address to specify
the Windows NetBIOS server, if one is present in your
network.
Lease Time Enter a lease time. This specifies the duration for which IP
addresses are leased to clients.
DHCP Relay Select the DHCP Relay radio button to use the VPN firewall as a DHCP relay
agent for a DHCP server somewhere else on your network. Enter the following
setting:
Relay Gateway The IP address of the DHCP server for which the VPN
firewall serves as a relay.
Enable LDAP
information
Select the Enable LDAP information check box to enable the DHCP server to
provide Lightweight Directory Access Protocol (LDAP) server information. Enter
the following settings:
LDAP Server The IP address or name of the LDAP server.
Search Base The search objects that specify the location in the directory
tree from which the LDAP search begin. You can specify
multiple search objects, separated by commas. The search
objects include:
• cn (for common name)
• ou (for organizational unit)
• o (for organization)
• c (for country)
• dc (for domain)
For example, to search the Netgear.net domain for all last
names of Johnson, you would enter:
cn=Johnson,dc=Netgear,dc=net
Port The port number for the LDAP server. The default setting is
0 (zero).
Table 3-3. DMZ Setup Settings (continued)
Setting Description (or Subfield and Description)
To Next Page
Loading...
