ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
3-28 LAN Configuration
v1.0, April 2010
Table 3-5. RIP Configuration Settings
Setting Description (or Subfield and Description)
RIP
RIP Direction From the RIP Direction drop-down list, select the direction in which the VPN
firewall sends and receives RIP packets:
• None. The VPN firewall neither advertises its route table, nor does it accept
any RIP packets from other routers. This effectively disables RIP.
• In Only. The VPN firewall accepts RIP information from other routers but
does not advertises its routing table.
• Out Only. The VPN firewall advertises its routing table but does not accept
RIP information from other routers.
• Both. The VPN firewall advertises its routing table and also processes RIP
information received from other routers.
RIP Version From the RIP Version drop-down list, select the version:
• Disabled. The RIP version is disabled. This is the default setting.
• RIP-1. Classful routing that does not include subnet information. This is the
most commonly supported version.
• RIP-2B. Routing that sends the routing data in RIP-2 format and uses
subnet broadcasting.
• RIP-2M. Routing that sends the routing data in RIP-2 format and uses
multicasting.
Authentication for RIP-2B/2M
Authentication for
RIP-2B/2M required?
Authentication for RP-2B or RIP-2M is disabled by default, that is, the No radio
button is selected. To enable authentication for RP-2B or RIP-2M, select the
Yes radio button and enter the settings for the following fields.
First Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.
Not Valid Before The beginning of the lifetime of the MD5 key. Enter the
month, date, year, hour, minute, and second. Before this
date and time, the MD5 key is not valid.
Not Valid After The end of the lifetime of the MD5 key. Enter the month,
date, year, hour, minute, and second. After this date and
time, the MD5 key is no longer valid.
Second Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.
To Next Page
Loading...
