NETGEAR WiFi 6 AX1800 User Manual

4. Select ADVANCED.
The ADVANCED Home page displays.
The color in the heading of each of the panes uses the following coding:
•
Green circle. The settings are fine and no problems exist. For a WiFi network, a
green circle displays if the network is enabled and secured.
•
Red circle. Settings are disabled, a problem exists, or the connection is down.
For a WiFi network, a red circle displays if the network is disabled.
The following tables describe the fields in the panes on the Advanced Home page.
DescriptionField
Router Information
The AP hardware version, which is the model number WAX204.Hardware Version
The AP firmware version. If you update the firmware, the version changes (see
Update the firmware on page 133).
Firmware Version
The AP language version for the local browser UI.GUI Language Version
The operation mode is AP. For more information about the changing the operation
mode, see Change the system mode to access point mode or to router mode on
page 166.
Operation Mode
DescriptionField
LAN Port
To change these settings, see Use the Setup Wizard [router mode] on page 41.
The MAC address that applies to the AP WAN (Internet) port.MAC Address
Displays if the DHCP client of the AP is enabled.DHCP
The LAN IP address that the AP receives from an existing router in your network
or the static (fixed) IP address that you manually configured.
IP Address
The IP subnet mask that the AP uses.IP Subnet Mask
User Manual153Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

NETGEAR WiFi 6 AX1800 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Maximum WiFi Speed	1.8Gbps
Bands	Dual-band
Ethernet Ports	1 x Gigabit Ethernet
MU-MIMO	Yes
Beamforming	Yes
Security	WPA3
OFDMA	Yes
Wireless Speed	600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
Antenna	Internal antennas
Power Source	Power adapter