DVR Server Manual
Step 1, set the Brightness / Contrast / Hue / Saturation for cameras.
Step 2, click Menu and select “Save Cameras Color Parameters”. Your
settings will be saved.
Step 3, Set the “Color Auto Adjust Time”, here you can set the software to
call the color settings saved in step 2 at a customize time. (Just adjust the time
and click “Add” to set a new plan, also you can delete the plans.)
Note: Each time you set the color and select “Save Cameras Color
Parameters”, the previous setting will be covered, then new added “Color Auto
Adjust Time” will only call the last color settings. And, when you click on the
time added in step 3, software will call the plan to show you what color setting
this plan is.
5. Backup/Video Convertor
Please refer to 4.5.2 for details.
6. DVD/CD Disc Backup Directly
Select this function to burn video data to DVD or CD. It is the same as
burn DVD/CD function in Playback.
7. Execute an External Program
Select this function to execute an external program.
8. Write Working Log
This is useful to record events that occur during the operator’s shift.
9. Open Explorer
When keyboard is locked, users can operate window resource via
explorer.
10. Open Screen Keyboard
This function allow user to use soft keyboard, you can press this bar to
open the screen keyboard. Also, in the setup interface you can Double-Click
the blank with your mouse to open this keyboard. User can close this keyboard
manually.
11. DVR Board Work Mode Setup
Each DVR system supports maximum 8 PCs 400XHC (total channel is
equal to 64) series board, so user can set its work mode via this GUI.
34
To Next Page
Loading...