DVR Server Manual
1. PTZ Speed
Press and drag the slider bar to adjust the speed of PTZ.
2. Relays (On/Off)
Control the PTZ cameras internal relay (relay1) or the decoder’s relay
(relay 1). Used to turn on a light or control an access gate.
3. Wipers (On/Off)
If using corresponding PTZ cameras wiper to control relay, this toggles the
relay/wiper on and off.
4. Zoom + / Zoom –
Zoom function of the PTZ camera control.
5. Focus + / Focus –
Auto-focus setup of the PTZ camera overrides, adjusted to focus the
image.
6. Iris + / Iris –
Overrides the PTZ cameras auto-iris and brighten or darken the image.
47
To Next Page
Loading...