be printed out. When complete, grasp the end of the paper, position it toward the front panel and
Be sure to use the designated printer paper (Seiko Instruments type TP-451C).
Other types of paper can yield inferior print quality and possibly damage the
printer.
If the paper is depleted, not properly set or the lever not correctly horizontal, the
LCD shows Error 70: Printer didn't respond when PRINTER is pressed. In this
case, check for paper supply and proper setting.
The printer is a thermal type and uses thermal paper. Since the print tends to
fade over time, again copy the image onto regular paper when long term storage
is intended.
Remove the printer paper before transporting the FRA5087. If left loaded, the
paper can unravel and lead to possible damage during transport.
To Next Page
Loading...
