NF FRA5087 - Table 5-2 Option Additional Display Modes

5.4 Operation method
FRA5087
5-7
Table 5-2 is added to Table 4-2. Combinations other than indicated in Tables 4-2 and 5-2 are
ineffective. If an ineffective combination is designated, the graph is not displayed and the
existing displayed graph is deleted. Since the data remain, by designating an effective
combination, the graph can again be displayed.
Table 5-2 Option additional display modes
[DISPLAY MODE]
Display item
X axis
Y1 axis
Y2 axis
X axis
Y1 axis (example)
Y2 axis (example)
logF
logR

Frequency (log)
Impedance (log)
Phase
logF
A
B
Resistance (linear)
Reactance (linear)
logF
logA
logB
Reactance (log)
Reactance (log)
logF
log(-A)
logB
- resistance (log)
Reactance (log)
logF
logA
log(-B)
Resistance (log)
- reactance (log)
logF
log(-A)
log(-B)
- reactance (log)
- reactance (log)
logF
logR
- - -
Impedance (log)
None
F
logR

Frequency (linear)
Impedance (log)
Phase
F
A
B
Reactance (linear)
Reactance (linear)
F
logA
logB
Resistance (log)
Reactance (log)
F
log(-A)
logB
- resistance (log)
Reactance (log)
F
logA
log(-B)
Resistance (log)
- reactance (log)
F
log(-A)
log(-B)
- resistance (log)
- reactance (log)
F
logR
- - -
Impedance (log)
None

logR
- - -
Phase
Impedance (log)
None
Table 5-2 indicates examples of Y1 and Y2 axis items when units are impedance and analysis mode
is CH1/CH2. The actual displayed items differ with the units and analysis mode, and are indicated
in Table 5-1.