7.1 Error messages
FRA5087
7.1.2 List of error messages
No. Messages Descriptions
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
1 Data number not found The data number for the mass data or the
permanent data specified cannot be found.
2 Storage memory overflow The storage area cannot be secured in the
permanent memory.
3 Storage memory overflow The storage area cannot be secured in the mass
memory.
4 No data to be stored No data exist to be stored.
5 Data is already stored The specified data have already been stored in
the mass memory.
6 Disk not found A USB flash drive is not connected.
7 Disk is write-protected Since the USB flash drive is write-protected, it
is not possible to write in it.
8 Can't access disk The USB flash drive cannot be accessed.
There are errors in the directory area of the USB
flash drive. For example:
・The USB flash drive is not formatted.
・The USB flash drive is in different format.
・The USB flash drive is damaged.
・The file is damaged.
9 Disk overflow The USB flash drive capacity is insufficient for
storage.
10 File not found The specified file cannot be found.
11 Storage memory overflow The memory capacity is insufficient for storage.
12 No data to be saved No data exist which are to be saved.
To Next Page
Loading...
