NF FRA5087 - Analysis Mode; Table 4-1 List of Analysis Modes

4.1 Overview of measurement and processing
FRA5087
4-4
4.1.2 Analysis mode
The analysis mode specifies the method in which the measurement data (V1, V2 and ) are to be
analyzed and processed. There are four (4) analysis modes, i.e., (CH1/CH2), (CH2/CH1), (CH1)
and (CH2), one of which should be set through the menu [Graph][FORMAT][ANALYSIS
MODE].
The result of analysis is given by the gain and phase for the analysis modes, (CH1/CH2) and
(CH2/CH1), and by voltage amplitude and phase for the analysis modes, (CH1) and (CH2).
Table 4-1 List of analysis modes
Measurement
mode
Analysis mode
Result of analysis
|V
1
|, 
1
|V
2
|, 
2
(CH1/CH2)
Gain = |V
1
|/|V
2
|
 = 
1
 
2
(CH2/CH1)
Gain = |V
2
|/|V
1
|
 = 
2
 
1
(CH1)
Amplitude = |V
1
|
 = 
1
 
2
(CH2)
Amplitude = |V
2
|
 = 
2
 
1