NF WF1946B - Function Tree

1.3 Function outline
WF1946B 1-5
 Function tree
Output
Output on/off (each channel independently)
Channel mode
2 channel independent, 2 phase, fixed frequency difference, fixed frequency ratio,
differential output
Channel selection
CH 1/CH 2/both channels simultaneously
Oscillation mode
Normal
Burst
Burst, trigger, gate, triggered gate
Sweep
Sweep mode
Single, continuous, gated
Sweep objective
Frequency, amplitude, DC offset, phase, duty
Sweep system
Linear, logarithmic
/ / /
Modulation
Modulation type
Frequency, amplitude, DC offset, phase, duty
Modulation waveform
/ / / /
Noise
DC
Waveform
/ / (50 % fixed duty)/ (variable duty)/ / /arbitrary waveform
(ARB)
Voltage
Output range
Amplitude setting
DC offset setting
High level setting
Low level setting
(continued)