WF1946B 8-11
8.4 Initialized settings
z Initialized settings
“3.3 Basic operation (Initialization table)”, cf.
z Error from backup battery depletion
In addition to setting initialization, following are set
Output on/off Off
Output on/off in turning on LAST-STATE (condition just before power off)
Setting memory All NOT STORED
Setting memory comment " " (blank)
User unit name USER
User unit computation formula (h+n)*m
User unit coefficient 1
User unit offset 0
Arbitrary waveform selection 0:ARB_00
Arbitrary waveform name ARB_00 ~ ARB_11
Arbitrary waveform data size 8 K
Arbitrary waveform data All 0
Remote control interface GPIB
GPIB address 2
GPIB delimiter CR+LF
USB ID 2
To Next Page
Loading...
