NF WF1946B - Units; Engineering Unit (Μ, M, K, M) Display

WF1946B 5-7
5.2 Units
 Engineering unit (µ, m, k, M) display
Operation is described for displaying engineering units (e.g., the k of 1 kHz). As an example, the
frequency units are changed.
Operation:
① Press the
ENTRY
key, then the
FREQ
key.
１０００．００００００００ Ｈｚ
Ａ０．１０００Ｖｐ－ｐ Ｏ＋０．００００Ｖ ／ＯＰＥＮ
② Press the
k
key to change the display as follows.
１．０００００００００００ｋＨｚ
Ａ０．１０００Ｖｐ－ｐ Ｏ＋０．００００Ｖ ／ＯＰＥＮ
Other:
• Unit change enable: Only when the
µ
,
m
,
k
or
M
key is lighted.
• Initializing units (e.g., from kHz to Hz): At above step②, press the
ENTER
key.