3.3 Basic operation
WF1946B
3-21
Operation:
As an example, 2 phase operation is described.
①
Press the
CHANNEL MODE
key, then select the mode with the
and
keys (2 PHASE flashes in
this example).
ＩＮＤＥＰ
２ＰＨＡＳＥ
２ＴＯＮＥ
4
ＳＥＬＥＣＴ ＣＨＡＮＮＥＬ ＭＯＤＥ
② Press the
ENTER
key to change the mode.
The 2PHASE lamp above the
CHANNEL MODE
key lights.
This completes channel mode change.
Other:
・ When the channel mode is changed, the CH2 setting is determined on the basis of the CH1 setting.
・ The channel mode and setting relationships
“3.3 Basic operation (■Channel modes and settings)”, cf.
To Next Page
Loading...
