3.2 Display at Power “ON” and Initial Setting
3-8 ZM2371/ZM2372
Table 3–1 Setting items and initial values 2/3
Measurement parameter automatic
selection
Kind of primary parameters
Equivalent circuit (primary
parameter)
Equivalent circuit automatic
selection
Kind of secondary parameters
Q|D||X|B|Rs|Rp|G
|Lp|Rdc(|IMAG|REAL)
Primary parameter deviation
display format
Primary parameter deviation
display
Primary parameter reference value
Secondary parameter deviation
display format
Secondary parameter deviation
display
Secondary parameter reference
value
Comparison of secondary parameter
Primary parameter upper limit
(value, ON/OFF)
Primary parameter lower limit
(value, ON/OFF))
Secondary parameter upper limit
(value, ON/OFF)
Secondary parameter lower limit
(value, ON/OFF)
Primary parameter comparison
format
Absolute value | Deviation |
Deviation %
Primary parameter deviation
comparison reference value
(Common to deviation display)
Primary parameter limit
comparison
Secondary parameter limit
comparison
<Handler interface>
(ZM2372 only)
(Fixed to initial
value for ZM2371)
Settings & correction value memory
recall target
Settings | Correction values |
Both
Status|BINn-Limit|
Sec-Limit|Pri&Sec-REF
|IV Monitor
To Next Page
Loading...
