DAP controller software 123
8 Close the Add/Remove Programs window and close the Control
panel window.
9 Click yes after you are prompted to restart the computer.
--End--
Procedure 41
Starting the TFTP server
Step Action
1 If you have Windows 2003, go to Start > Control Panel. If you
have Windows 2000, go to Settings > Control Panel.
2 Open Administrative Tools.
3 Open Services.
The Services window appears.
4 Select Trivial FTP Deamon.
5 Right-click the Trivial FTP Deamon and then select Start.
6 Right-click the Trivial FTP Deamon and then select Properties.
7 Change the Startup Type setting to Automatic.
8 After TFTP is successfully installed on your PC with Windows
2000, a folder named tftpdroot is created.
Note: If you are running Windows 2003, a tftpdroot folder is
not automatically created. You must create this folder yourself
on drive C:, as shown in the following figure.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.