156 System configuration
6 Click Submit.
--End--
Adding a D-Channel
To add a D-Channel using Element manager, complete the following
procedure.
Procedure 62
Adding a D-Channel
Step Action
1 Select Routes & Trunk > D-Channels from the menu list.
2 On D-channels list page select a number, for example 5, for
D-Channel Number and DCH for type, and then click Add.
The D-Channels Y Property Configuration page appears.
3 Select DCIP for CTYP, ISLD for USR and SL1 for IFC.
4 Select BSCOPT and click Edit to configure Remote Capabilities
(RCAP).
5 On Remote Capabilities Configuration page select the check
box for ND2 and MWI then click return.
6 Click Submit.
--End--
Adding a route
To add a route using Element manager, complete the following procedure.
Procedure 63
Adding a route
Step Action
1 Select Routes & Trunks > Routes and Trunks from the menu
list.
2 On the Route and Trunks page click Add route and Customer
X.
The New Route Configuration page appears.
3 Select a number, for example 6, for ROUT.
4 Select TIE for TKTP.
5 Select IAO for ICOG and enter a number, for example 6 for
ACOD.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
