Oceanic OC1 - Page 136

136
Set DD3 Alarm**, information includes (Fig. 133A):
> Depth value with MAX and FT (or M) icons
> Graphics DD3 AL
> Graphic OFF (or ON) flashing
• A < 2 sec to toggle OFF/ON
• S (< 2 sec) to save Set Point and flash Depth digits (if ON);
or revert to FREE Menu (if OFF)
** If this screen is accessed when DD2 is set Off, a message
(Fig. 133B) will be displayed for 5 seconds, then operation
will revert to the FREE Menu.
• A (hold) to scroll up through Depth values at a rate of 8 per
second, beginning 1 increment > DD2 Set Point (50 FT/12
M min) to 330 FT (100 M) in increments of 10 FT (1 M)
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the setting and revert to the FREE Menu.
Fig.133A-SETDD3AL
Fig.133B-SETMESSAGE