45487001TH Rev.1
2-32 /
Oki Data CONFIDENTIAL
2. Installation
WPS-PBC
(1) Pressthescrollbutton toselect[WirelessSetting]andthenpressthe<ENTER>
button.
(2) Entertheadministratorpasswordusingtheten-keypad,thenpressthe<ENTER>
button.
The factory default password is “aaaaaa”. Press the <ENTER> button whenever
inputting one character.
(3) Whenthe display shown belowappears,read it carefully. Press the<ENTER>
buttonorwaituntilthedisplaychanges.
(4) Checkthat [Automatic Setup (WPS)] is selected and then press the <ENTER>
button.
(5) Checkthat[WPS-PBC]isselectedandthenpressthe<ENTER>button.
(6) Select[Yes]andthenpressthe<ENTER>button.
MemoIf[No]isselected,thescreenreturnstothatfromstep5.
(7) When[Runningpushbuttonmethod…]isdisplayed,pressandholdthepushbutton
ontheaccesspointoftheWirelessLANforseveralsecondsthenreleaseit.
Note! • [Runningpushbutton method…]is displayedforabout two minutes. Press
andholdthepushbuttonontheaccesspointoftheWirelessLANwhileitis
displayed.
• ForthepositionofthepushbuttonontheaccesspointoftheWirelessLAN
andhowlongit should beheldpressed,referto theoperationmanualfor
theaccesspointoftheWirelessLAN.
• While [Running pushbutton method…] is displayed, the printer cannot be
operated.
• When[WPSConnectionsuccessfulisdisplayed,thisequipmentis
connectedtothewirelessLAN.