Replacing Consumables 11-13
7 While pressing down the area
marked “Push” on the imaging
unit to be replaced, slide the unit
completely out of the machine.
The following instructions show
the procedure to replace the
imaging unit (K).
Dispose of the used imaging unit according to your local regulations.
Do not burn the imaging unit.
8 Check the color of the new imaging unit to be installed.
" In order to prevent toner from spilling, leave the imaging unit in the
bag until step 7 is being performed.
9 Remove the imaging unit from
the bag.
To Next Page
Loading...
Need help?
General
