6-3 Connecting to Computers via Wi-Fi
Connecting Manually (Manual Connections)
Adjust network settings manually. You will need to provide:
SSID The network name (SSID).
Authentication The type of security used on the network.
Password The password for connection to a secured network.
IP Address Assign
Choose whether the camera IP address is assigned automatically
by the network DHCP server.
IP Address
These fi elds are required when the IP address is assigned
manually. The settings used vary with the network.
Subnet Mask
Default Gateway
DNS
1 Press the MENU button on the camera to display
the camera menus.
2 Highlight [T Wi-Fi Connect] in the q playback
menu and press I on the arrow pad.
• [T Wi-Fi Connect] options will be displayed.
• This item is only available when [On] is selected for
[Wi-Fi/Bluetooth Settings] > [Availability] in the camera
e setup menu.
3 Highlight [Access Point Connection] using the FG
buttons and press the OK button.
• [Access Point Connection] options will be displayed.
4 Highlight [Connect manually] using the FG buttons
and press the OK button.
609
EN
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
