Omni 7000 Series - Page 98

OMNI 4000/7000 Installation Guide – Rev H
4-38
Configuration
4.
a. In the Setup Communications
window, select Front Panel USB
(or OMNI CPU USB) from the Media
Type drop-down list.
b. In the Site Name field, enter a
name for this site.
When a USB site is selected, a single OMNI CPU or front panel unit is
automatically added, and its default settings cannot be changed.
5.
Click OK to exit the Setup
Communications window.
Connecting through a Modem or
Satellite
To connect through a Modem or Satellite, follow these instructions:
1.
Click the Home tab on the
OMNICONNECT ribbon.
2.
Click the Sites button in the Home ribbon
to open the Setup Sites window.
3.
In the Setup Sites window, click Add
Site to open the Setup Communications
window.