Omron CJ2 User Manual

4 Support Software
4-2
CJ2 CPU Unit Hardware User’s Manual
4-1 Support Software
“Support Software” refers to software applications for programming and debugging OMRON Program-
mable Controllers.
The CX-One provides an integrated package of Support Software for OMRON PLCs and components.
It consists of software applications for PLC programming, network settings, touch-panel screen cre-
ation, servo control, inverters, temperature control, and other functions.
4-1-1 CX-One FA Integrated Tool Package
CX-One Integrated Tool Package Contents
NS-series
PT
SSR
CX-Designer
CX-Thermo
CX-Drive
CX-Integrator
CX-Motion-NCF
CX-Motion
CX-Protocol
CX-One
CX-Position
CX-Simulat
CX-Programmer
CX-Motion-MCH
CX-Process
SwitchBox Utility
Face Plate
Auto-Builder for NS
Network
Configurator
●
Touch-panel screen
creation
●
Motion control
●
Programming/simulation
●
Network settings
●
Servo/Inverter settings
●
Protocol macro creation
●
Temperature
control settings
●
PLC-based
process control
Networks between PLCs
Loop Controller
Devices by
other
manufacturers
Serial
Field
network
Temperature control
Servo
Inverter

Omron CJ2 Specifications

General

Model	CJ2
Manufacturer	Omron
Type	Programmable Logic Controller (PLC)
CPU Units	Multiple models available (e.g., CJ2M, CJ2H)
Number of I/O Points	Up to 2, 560 points
Communication Ports	Ethernet/IP, EtherCAT, USB, Serial
Expansion	Yes, via I/O Units and Special I/O Units
I/O Control Method	Cyclic Scan, Interrupt
Programming Language	Ladder diagram, structured text, function block diagram, sequential function chart, instruction list
Built-in I/O	Available on some models (e.g., CJ2M)
Ethernet Port	Yes, 1 port (depending on CPU Unit)
Serial Ports	RS-232C, RS-422/485 (configurable)
USB Port	Yes (for programming and monitoring)
Operating Temperature	0°C to 55°C
Storage Temperature	-25 to 70°C
Humidity	10 to 95% RH (non-condensing)
Vibration Resistance	10 to 57 Hz, Amplitude: 0.075 mm, 57 to 150 Hz, Acceleration: 1 G, X, Y, and Z directions, 80 min each
Power Supply Voltage	24 VDC or 100 to 240 VAC (depending on CPU Unit)