33
Changes in SW2 Section 1-7
the CPU Unit will start in RUN mode as soon as power is turned ON. Be
sure that adequate precautions are taken to ensure safety.
2. If SW2 is for connecting a device other than a Programming Console to the
peripheral connector, the CPU Unit will start in RUN mode as soon as pow-
er is turned ON even if a device is connected to the RS-232C port. Be sure
that adequate precautions are taken to ensure safety.
Connections
IBM PC/AT
or compatib
le
XW2Z-200S-V
XW2Z-500S-V
CPM2C-CN111
CS1W-CN118
CPM2C-CIF01-V1
To Next Page
Loading...
