Omron WS02-SIMC1-E - V1.9 REV 02-2009 User Manual

Debug Console Window Section 3-9
89
[Data Replay]
Start the [Data Replay Settings] window and then Data Replay Tool using the
set file.
• Replay file Input the file name to be replayed by Data Replay
Tool. The Command Log file (.flg), the data trace data
file (.cdt), and the data replay file (.csv) can be re-
played.
• Output file Input the file name to output the monitor data corre-
sponding to the replay data to. The format of the
output file will be that of the data replay file(.csv).
• Output template If the data to be monitored into the output file is set to
the other data replay file, the file can be specified as
the output template file.
• Browse Select the name of the replay file, output file, and
output template file specifying the destination for
browsing.
• FINS Address Set the destination FINS address for the data replay.
The FINS address for the Ladder Engine is set in
default.
• Synchronous replay Replay synchronously.
• OK Start the Data Replay Tool with the present settings.
• Cancel Discard the present settings and exit the window.

Omron WS02-SIMC1-E - V1.9 REV 02-2009 Specifications

General

Brand	Omron
Model	WS02-SIMC1-E - V1.9 REV 02-2009
Category	Software
Language	English