Debug Console Window Section 3-9
92
FINS Address Filters
• Registration List Display the FINS address selectable as the FINS ad-
dress filter. The [All local nodes] shows all FINS ad-
dresses in the computer. Usually specify the [All local
nodes] as the filter (registered as the initial value and
can not be deleted).
• Filter Check Check here if selecting items in the Registration List.
• Add Add the FINS address to the Registration List.
• Delete Delete the selected items in the Registration List.
• Network address Specify the FINS network address to be added to the
Registration List. Specifying "*" will target all of the
network addresses.
• Node address Specify the FINS node address to be added to the
Registration List. Specifying "*" will target all of the
node addresses.
• Machine address Specify the FINS node address to be added to the
Registration List. Specifying "*" will target all of the
machine numbers.
• Name Specify the name of the FINS address to be added to
the Registration List.
FINS Command Filters
• The Registration
List
Display the filter of the FINS commands selectable as
the FINS command filter. When selecting, compare
from top of the FINS commands and save the matched
commands as the log.
• Filter Check Check here if selecting the item in the Registration List.
• Add Add the filter of the FINS command to the Registration
List.
• Delete Delete the selected items in the Registration List.
• Command name Display the list of FINS command filters registered in
advance.
Note
Refer to 8-3 Generating Virtual External Inputs for the details of the Command
Log setting.
[Command log] | [View Log]
Display the contents of the saved Command Log. Display the content of the file
set as the log file in the Command log Setting with the Memo Pad (OS stan-
dard).
To Next Page
Loading...
Need help?
General