xvii
• Functions Supported for Unit Version 2.0 or Later
The following tables list the functions added for unit version 2.0 and supported
by the CX-Programmer. CX-Programmer version 4.0 or higher and
CX-Simulator version 1.4 or higher are required to use these functions.
CS1-H CPU Units
CJ1-H CPU Units
(CJ1@-CPU@@H)
Function
Unit version 2.0 or
later
Other unit ver-
sions
Downloading and Uploading Individual
Tasks
OK ---
Improved Read Protection Using Passwords
OK ---
Write Protection from FINS Commands Sent
to CPU Units via Networks
OK ---
Online Network Connections without I/O Ta-
bles
OK ---
Communications through a Maximum of 8
Network Levels
OK ---
Connecting Online to PLCs via NS-series
PTs
OK OK from lot number
030201
Setting First Slot Words
OK for up to 64
groups
OK for up to 8
groups
Automatic Transfers at Power ON without a
Parameter File
OK ---
Automatic Detection of I/O Allocation
Method for Automatic Transfer at Power ON
--- ---
Operation Start/End Times
OK ---
MILH, MILR, MILC
OK ---
=DT, <>DT, <DT, <=DT,
>DT, >=DT
OK ---
BCMP2
OK ---
GRY
OK OK from lot number
030201
TPO
OK ---
DSW, TKY, HKY, MTR,
7SEG
OK ---
EXPLT, EGATR, ESATR,
ECHRD, ECHWR
OK ---
Reading/Writing CPU Bus
Units with IORD/IOWR
OK OK from lot number
030418
New Applica-
tion Instruc-
tions
PRV2
--- ---
To Next Page
Loading...
