Performing Initial Configuration (BUI)
Note - LDAP and NIS are optional for setup, but recommended. LDAP is preferred to NIS;
do not run NIS and LDAP at the same time.
■
Default router IP address
■
IP address and netmask for the management interface (two if clustered controllers)
■
IP address and netmask for the data interface (two if clustered controllers)
■
DNS/NIS/LDAP domain name
■
DNS IP address(es)
■
NIS server IP address(es)
■
NTP server IP address
■
For LDAP:
■
LDAP server IP addresses
■
Base search domain name
■
Recursive or non-recursive search
■
Authentication method: anonymous, self, or proxy (specific user)
■
SSL/TLS usage
■
You can skip any or all configuration screens by clicking COMMIT without making any
changes. For the final and registration step, click LATER if you want to complete the screen
later. To return to the beginning of the configuration utility, go to Maintenance > System
and click INITIAL SETUP.
1.
Ensure you have configured the system as described in “Configuring the
System” on page 238.
2.
Direct your browser to the appliance using either the IP address or host name
you assigned during system configuration as follows:
https://ipaddress:215 or https://hostname:215
The login screen appears.
Note - If the login screen does not appear and an error message is displayed instead, add an
exception and download the certificate.
242 Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021
To Next Page
Loading...
Need help?
General
