Oracle ZFS User Manual

Performing Initial Configuration (BUI)
Note - You can create a management interface now, or at another time using a task in
“Configuring Management Interfaces” in Oracle ZFS Storage Appliance Administration Guide,
Release OS8.8.x.
For detailed information, see “Network Configuration” in Oracle ZFS Storage Appliance
Administration Guide, Release OS8.8.x.
To create a management interface now, use the following steps as an example:
a.
Click the add icon next to Datalinks.
b.
In the Network Datalink dialog box, set the following minimum datalink
properties.
■
VNIC - Select this check box.
■
Name - Enter a name for the datalink.
246 Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021

Oracle ZFS Specifications

General

Category	Storage
Operating System	Oracle Solaris
Protocol Support	NFS, SMB, iSCSI, FC
Data Protection	Snapshots, Clones, Replication
Encryption	AES-256 encryption for data at rest
Integration	Oracle Database
RAID Levels	RAID-Z2, RAID-Z3
Data Deduplication	Yes
Data Integrity	Checksums
High Availability	Redundant hardware
Maximum Capacity	Petabytes
Management	Command-line interface (CLI)