Oracle ZFS User Manual

Performing Initial Configuration (BUI)
For detailed information, see the following tasks:
■
“Creating a VNIC Without a VLAN ID for Clustered Controllers (BUI)” in Oracle
ZFS Storage Appliance Administration Guide, Release OS8.8.x
■
“Creating VNICs with the Same VLAN ID for Clustered Controllers (BUI)” in Oracle
ZFS Storage Appliance Administration Guide, Release OS8.8.x
c.
Click APPLY.
d.
Drag the resulting datalink to the Interfaces column.
e.
In the Network Interface dialog box, set the following minimum interface
properties:
■
Name - Type a name for the interface.
■
Enable Interface - Select this check box to enable the interface.
■
Allow Administration - Select this check box to make this a management interface,
which enables BUI connections on port 215 and CLI connections on ssh port 22.
■
Use IPv4 Protocol or Use IPv6 Protocol - Select a protocol, its type of address, and
enter one or more IP addresses in CIDR notation.
Configuring the Appliance for the First Time 247

Oracle ZFS Specifications

General

Category	Storage
Operating System	Oracle Solaris
Protocol Support	NFS, SMB, iSCSI, FC
Data Protection	Snapshots, Clones, Replication
Encryption	AES-256 encryption for data at rest
Integration	Oracle Database
RAID Levels	RAID-Z2, RAID-Z3
Data Deduplication	Yes
Data Integrity	Checksums
High Availability	Redundant hardware
Maximum Capacity	Petabytes
Management	Command-line interface (CLI)