VS 2001
Technical Handbook
Accessories
P/N: 779-0373/02
Revision 02
Marconi Proprietary information
Page 13
1.7 PROGRAMMING THE EQUIPMENT
The equipment operating parameters are normally programmed with the auxiliary
of an external PC and a suitable programming kit (described in Section 4 of this
handbook), letting the user the possibility, however, of entering and/or modifying
some data by means of the Front Panel controls.
The configuration is accomplished by connecting the equipment to a personal
computer in order to carry out all of the configuration (individual and network data)
and personalisation operations.
For this purpose, a suitable software, the PRP (Programming Package) operating
on Windows 95/98/2000 NT platform has to be loaded in the personal computer
having a user friendly type of user interface with self explanatory windows. This
program allows the personalising of the various radio units and to carry out the
write, read, modify and print operations in the relative files.
In order to facilitate the above mentioned operations adequate aids are supplied
such as:
• Instruction manuals for programming and installing the software.
• "Help" on the display regarding the intervals relative to the parameters to be
set.
It is also possible, through the same connection, to carry out the download of the
equipment’s operating software, thus allowing the upgrading of the software of the
equipment itself without having to tamper with the equipment in any way.
To Next Page
Loading...