VS 2001
Technical Handbook
Accessories
P/N: 779-0373/02
Revision 02
Marconi Proprietary information
Page 57
3.4 INSTALLATION OF THE CONTROL PANEL
The control panel dimensions are shown in Fig. 3.4 and Fig. 3.5.
3.4.1 3.6.1 Installation of the control panel in a car
In the vehicle configuration the control panel can be:
• Mounted into the Car Radio cavity
• Mounted in adjustable bracket:
- On the dashboard
- Under the dashboard
- Suspended from the roof of the car
• Mounted in lite braket
The first type of mounting is realized by using the car radio cavity. The second type
of mounting is realized by means of a turntable support consisting of two
independent brackets connected by means of a pin. The turntable support allows
horizontal (± 45°) and vertical rotation.
The third type has a support that not allows the horizontal rotation.
Fig. 3.4: Control panel
49.5
180
29.5
62.6
83.1
210
To Next Page
Loading...