VS 2001
Technical Handbook
Safety rules
P/N: 779-0373/02
Revision 02
Marconi Proprietary information
Page
This equipment is marked
According to the requirements specified in the R&TTE directive 1999/5/EC and the
Commission Decision 6th April 2000, the EC marking is accompanied by the Class
II equipment class identifier.
This equipment is intended for sell and use in Austria, Belgium, Denmark, Finland,
France, Germany, Greece, Ireland, Italy, Luxembourg, Portugal, Spain, Sweden,
The Netherlands, United Kingdom.
This equipment requires authorization or license for use.
This equipment operates on frequency bands non-harmonised in the EU.
This equipment can also be used worldwide where the equipment is approved for
use.
To Next Page
Loading...