EasyManua.ls Logo

Otto B500 Service Manual

Otto B500
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image



Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Otto B500 and is the answer not in the manual?

Otto B500 Specifications

General IconGeneral
ModelB500
Control InterfaceJoystick
Drive SystemRear-wheel drive
Seat Depth40 cm
Climbing Ability8 degrees
Weight Capacity300 lbs (136 kg)
Top Speed5 mph (8 km/h)

Summary

2 Safety Instructions

2.3 General Safety Instructions

Provides general safety guidelines for maintenance and operation.

2.5 Safety Instructions for Maintenance Tasks

Safety precautions to be observed during maintenance tasks, including pinch points and preparation.

2.6 Safety Instructions for Maintenance Tasks on Electrical Components

Specific safety rules for working on electrical components and batteries.

2.8 Safety Instructions for Controller Configuration

Warnings about risks associated with incorrect controller configuration settings.

5 Information and Error Messages

5.2 Error Messages

Lists error symbols, causes, and recommended measures for troubleshooting.

6 Service and Maintenance

6.3 Batteries

General safety and information regarding the wheelchair's batteries.

6.8 Wheel Lock and Wheel Lock Release

Procedures for maintaining and adjusting the wheel lock system.

6.14 Replacing the Frame

Steps for safely replacing the wheelchair frame.

6.15 Replacing the Drive Unit Sustainer

Instructions for replacing the drive unit sustainer, with electrical safety.

6.16 Replacing the Drive Motor

Procedure for replacing the drive motor, with electrical safety.

7 enAble40 Wheelchair Control

7.3 Programmable Parameters

Warning about configuration risks and overview of programmable parameters.

7.3.1 "Configuration" Parameter

Explains the "Configuration" parameter for selecting wheelchair models.

7.3.2 "MyChair" Parameter

Describes the "MyChair" parameter for customizing driving profiles.

7.3.3 Drive Menu

Parameters for forward/reverse speed, acceleration, and driving feel.

7.3.4 Steer Menu

Parameters for turning speed, acceleration, and steering sensitivity.

7.3.6 Speed Mode

Settings for defining speed modes and their limits.

7.3.7 Joystick Menu

Parameters for joystick deadband, sensitivity, and calibration.

8 Maintenance and Service Plan B500/B500-S