90
There are six main menus with additional sub-menus.
Program Provides access to the programmable parameters.
Monitor Displays values in real-time, even during operation.
Faults Displays diagnosis information; the error log can also be erased here.
Functions Provides access to the copy function and the “Reset” command.
Information
Displays control unit data: Model and serial number, manufacturing date, hard-
ware and software versions and other devices that may be related to control unit
functionality.
Programmer
Setup
Displays the data of the programming device: Model and serial number, manufactur-
ing date, hardware and software versions and a list of programmable parameters
that can be accessed by this programming device.
To Next Page
Loading...