Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
107
27.4 Sensors activating SERVICE signal (H4/U4)
Service signal is indicated by LED "Service" (L12). The week
average sensor value is over the service level respectively for one or
more sensors. (Regarding the service signal levels, see Planning
Instructions, chapter "Service signal".
Menu H4/U4 is a list of the sensor(s) activating service signal.
NOTE! Service signal is only information that a sensor has to be
replaced soon. The service signal has to be acknowledged, see chapter
"Acknowledge SERVICE signal (H8/S4)", page 129.
If there are no sensors activating service signal,
--- List is empty --- will be shown.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 81.
Scroll to menu H4.
Present system status
ACCEPT? H4
"A"
Disablement
ACCEPT? U1
Scroll to menu U4.
Sensors activating SERVICE signal
ACCEPT? U4
Press "A" to accept.
"A"
Sensor : ZZ-AA (technical address aaa)
needs service L
L = a list in which you
can scroll. If there are no
sensors activating service
signal,
--- List is empty ---
will be shown.
"Return"
Sensors activating SERVICE signal
ACCEPT? U4
Scroll or press "Return"
to menu H4.
"Return"
Present system status
ACCEPT? H4
Scroll or press "Return".