Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
137
31.10 Reset activated output (H8/S10)
Output(s) activated via menu H8/S9 have to be reset via this menu
(H8/S10).
NOTE! Only output types that are activated will be shown and
possible to select.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 81.
Scroll to menu H8.
Maintenance
ACCEPT? H8
"A"
Acknowledge SERVICE signal
ACCEPT? S1
Scroll to menu S10.
Reset activated output
ACCEPT? S10
"A"
Reset output type: 0
0=Loopunit 1=S 2=R0 3=EXPB ACCEPT?
Only output types that are
activated will be shown.
Loop unit=3361 or 3364
S=S0-S1
R0=R0
EXPB= 4581 or 4583
Depending on if 0, 1, 2
or 3 is selected one of
the alternatives will be
shown.
Reset output: 0, technical address 000
ACCEPT? L
L=A list in which you can
scroll. Select the output to
reset and press "A".
Reset S0
ACCEPT? L
Reset R0
ACCEPT? L
Reset output: 0, expansion board 0
ACCEPT? L
"A"
Reset output type: 0
0=Loopunit 1=S 2=R0 3=EXPB ACCEPT?
Only output types that are
activated will be shown.
When all outputs are reset,
--- List is empty ---
will be shown.
"Return"
Reset activated output
ACCEPT? S10
Scroll or press "Return" to
menu H8.
"Return"
Maintenance
ACCEPT? H8
Scroll or press "Return".