Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
95
25.8 Re-enable all control, ventil, exting or
interlocking outputs (H2/B8)
Disabled outputs are listed in menu H4/U1.
When all outputs have been re-enabled, the LED "Disablements" (L8)
will be turned OFF, if there are no other disablements.
If there is nothing to re-enable, --- List is empty --- will be
shown.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 81.
Scroll to menu H2.
Disable or re-enable
ACCEPT? H2
"A"
Disable zone
ACCEPT? B1
Scroll to menu B8.
Re-enable all control, ventil, exting
or interlocking outputs ACCEPT? B8
"A"
Re-enable type:0 0=Control 1=Ventilation
2=Exting 3=Interlocking ACCEPT?
Only disabled type(s) will
be shown. Press:
"0"=control output
"1"=extinguishing output
"2"=ventilation output
"3"=interlocking output.
Press "A" to accept.
Or, e.g. if only type 1 is disabled:
Re-enable type:0 1=Ventilation
ACCEPT?
Press 1
"A"
--- List is empty ---
All types are re-enabled.
"Return"
Re-enable all control, ventil, exting
or interlocking outputs ACCEPT? B8
Scroll or press "Return" to
menu H2.
"Return"
Disable or re-enable
ACCEPT? H2
Scroll or press "Return".