Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
135
31.9 Activate output (H8/S9)
Any output can be activated via this menu (H8/S9).
NOTE! It will be activated until reset via menu H8/S10.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 81.
Scroll to menu H8.
Maintenance
ACCEPT? H8
"A"
Acknowledge SERVICE signal
ACCEPT? S1
Scroll to menu S9.
Activate output
ACCEPT? S9
"A"
Activate output type: 0
0=Loopunit 1=S 2=R0 3=EXPB ACCEPT?
Loop unit=3361 or 3364
S=S0-S1
R0=R0
EXPB= 4581 or 4583
Depending on if 0, 1, 2
or 3 is selected one of
the alternatives will be
shown.
Activate output: 0, technical address 000
ACCEPT?
Fill in the requested data
respectively and press
"A".
Activate S0
ACCEPT?
Activate R0
ACCEPT?
Activate output: 0, expansion board 0
ACCEPT?
"A"
Depending on if 0, 1, 2
or 3 is selected one of
the alternatives will be
shown.
Output 0 technical address 002
forced active
Output S0 forced active
Output R0 forced active
Output 0 expansion board 0 forced active
"A"
"Return"
Activate output type: 0
0=Loopunit 1=S 2=R0 3=EXPB ACCEPT?
If more outputs shall be
activated do as above, else