Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
74
20.4 Download of Alarm texts
When a fire alarm is activated (e.g. an addressable alarm point), the
presentation number (Zone - Address) is shown on the first row in the
EBL128 display and in any ext. FBP display.
On the second row is
a user definable alarm text shown, if programmed. See also chapter
"Fire alarm", page 42.
Each alarm point can have a unique alarm text. When several alarms
are activated (in one or more zones) and only the zone numbers are
shown, each zone can have a unique alarm text.
Each zone line input can have a unique alarm text.
The alarm texts will be printed out if an ext. FBP 1826 with a printer
is connected.
All alarm texts, up to 40 alphanumeric characters each, are normally
created when each alarm point is programmed and downloaded to the
control unit via EBLWin (SSD Download). See Planning
Instructions, chapter "Alarm texts".
To Next Page
Loading...
