Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
1
Table of contents
1 Introduction________________________________ 7
2 Definitions / Explanations ____________________ 9
2.1 PESN AB ________________________________________ 9
2.2 Alarm point _______________________________________ 9
2.2.1 Smoke detector ________________________________ 9
2.2.2 Sensor _______________________________________ 9
2.2.3 Analog detector ________________________________ 9
2.2.4 (Analog) Sensor Base (ASB) _____________________ 9
2.2.5 Conventional detector ___________________________ 9
2.2.6 Conventional Detector Base (CDB) ________________ 9
2.2.7 Addressable ___________________________________ 9
2.2.8 Old detector __________________________________ 10
2.2.9 Conventional zone line _________________________ 10
2.2.10 Addressable zone interface ______________________ 10
2.3 Output unit ______________________________________ 10
2.4 Output / Control output _____________________________ 10
2.5 Short circuit isolator _______________________________ 10
2.6 Display unit (D.U.) ________________________________ 10
2.7 COM loop _______________________________________ 10
2.8 Control Unit (C.U.) / C.I.E. __________________________ 10
2.9 Fire Brigade Panel (FBP) ___________________________ 10
2.10 Control panel (CP) ________________________________ 11
2.11 LED ____________________________________________ 11
2.12 External Indicator (LED) ___________________________ 11
2.13 Display / LCD ____________________________________ 11
2.14 Door open / Key switch _____________________________ 11
2.15 Site Specific Data (SSD) ____________________________ 11
2.16 Software (S/W) / Firmware / System program ___________ 11
2.17 EBLWin ________________________________________ 11
2.18 Web-server ______________________________________ 11
3 Overview _________________________________ 12
3.1 The EBL128 c.i.e. _________________________________ 12
3.2 S/W versions _____________________________________ 12
3.3 Documents ______________________________________ 12
3.4 Applications _____________________________________ 12
3.5 PC S/W _________________________________________ 12
4 Control & Indicating Equipment _____________ 14
5 LED indicators and push buttons _____________ 16
6 Normal operation __________________________ 21
6.1 The display in EBL128 _____________________________ 21
6.1.1 LCD backlight ________________________________ 21