Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
26
7.4 User level 2C
After the door has been opened with the fire brigade key (LED "Door
open" is lit), you have access to level 2A and after log on as “Building
officer” (level 2C), access to the following menus:
H1 Perform monthly test
H2 Disable or re-enable
B1 Disable Zone
B2 Disable zone-address
B3 Disable output
B4 Disable all control, ventilation, exting or interlocking outputs
B5 Re-enable zone
B6 Re-enable zone-address
B7 Re-enable output
B8 Re-enable all control, ventilation, exting or interlocking
outputs
B9 Disable / re-enable alarm devices
B10 Disable / re-enable outputs for routing equipment
B11 Disable / re-enable alert annunciation function
H3 Set calendar and clock
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Sensor values
U4 Sensors activating SERVICE signal
U5 Technical warning
U6 Event log
U7 Version and alarm counter
H6 FAULT Acknowledge
H7 Perform ZONE TEST ("Test mode")
H9 Interlocking outputs and inputs
C1 Activated interlocking outputs / inputs
C2 Activate interlocking output
C3 Reset interlocking output
C4 Disable interlocking output
C5 Re-enable interlocking output
H10 Change password (In this case for “Building officer”.)