Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
110
27.7 Version and alarm counter (H4/U7)
Version: Menu H4/U7 can be used to see the EBL128 software /
firmware version.
Alarm counter The alarm counter is increased with "1" every time
the c.i.e. enters the real "fire alarm condition" (Fire alarm indication in
the display, LEDs "Fire" lit and the c.i.e. buzzer sounding), i.e. not for
zones in test mode. It starts on 000 and goes to 999. It can be reset to
000 via EBLWin (Control unit menu "Reset alarm counter…"). It is
stored in an EEPROM, i.e. the value will be retained also after the
c.i.e. has been de-energized.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 81.
Scroll to menu H4.
Present system status
ACCEPT? H4
"A"
Disablement
ACCEPT? U1
Scroll to menu U7.
Version and alarm counter
ACCEPT? U7
Press "A" to accept.
"A"
Version: X.X.X
Alarm counter: yyy
Press "Return" to menu
U7.
"Return"
Version and alarm counter
ACCEPT? U7
Scroll or press "Return"
to menu H4.
"Return"
Present system status
ACCEPT? H4
Scroll or press "Return".